Thanks!
You're clear, and actual configuration is made as you said.
As you can see from FigureA (attached), there're 4 HBAs under storage adapters. But only 2 of them are used to map LUNS, in this figure vmhba2 and vmhba4. If i try to see paths for vmhba3 or vmhba5, i notice that no paths are available so i suppose that no zoning to the SAN was made for these hbas.
Under networking i can see a dvswitch made for vmotion that use two 10Gb hbas (FigureD). If i check the configuration i notice that there're other two 10Gb unclaimed adapters (FigureC) named vmnic4 and vmnic6.
Phisically on the hosts, there're 4 10Gb fibers cabled.
My conclusions is that vmhba3 and vmhba5 that i see under storage adapters with no paths are vmnic5 and vmnic7 that i see under networking.
vmhba2 and vmhba4 under storage adapters are vmnic4 and vmnic6 unclaimed adapters under networking.
Do you agree with me?
Is it a good configuration?
BR
Lo