Re: CreateVM_Task fails if harddisks are connected to Scsi Ctrls

It makes sense.

<vw1:device xsi:type="vw1:VirtualPCIController">
            <vw1:key>100</vw1:key>
            <vw1:deviceInfo xsi:type="vw1:Description">
                <vw1:label>PCI controller 0</vw1:label>
                <vw1:summary>PCI controller 0</vw1:summary>
            </vw1:deviceInfo>
            <vw1:busNumber>0</vw1:busNumber>
            <vw1:device>1000</vw1:device>
            <vw1:device>4000</vw1:device>
            <vw1:device>500</vw1:device>
            <vw1:device>12000</vw1:device>
        </vw1:device>

One of the device connects to it is the BusLogicController ==> 1000.

<vw1:device xsi:type="vw1:VirtualBusLogicController">
            <vw1:key>1000</vw1:key>
            <vw1:deviceInfo xsi:type="vw1:Description">
                <vw1:label>SCSI controller 0</vw1:label>
                <vw1:summary>BusLogic Parallel</vw1:summary>
            </vw1:deviceInfo>
            <vw1:controllerKey>100</vw1:controllerKey>
            <vw1:unitNumber>3</vw1:unitNumber>
            <vw1:busNumber>0</vw1:busNumber>
            <vw1:device>2000</vw1:device>
            <vw1:hotAddRemove>true</vw1:hotAddRemove>
            <vw1:sharedBus>noSharing</vw1:sharedBus>
            <vw1:scsiCtlrUnitNumber>7</vw1:scsiCtlrUnitNumber>
        </vw1:device>

I just have to figure out why I am getting it wrong when I read from the file.

./Siva.