Hi,
I currently setting up vmmark and i not able to get the mailserver result as shown below
| TILE_0 | Actual | Ratio | QoS | Actual | Ratio | QoS | Actual | Ratio | QoS | Actual | Ratio | QoS | Actual | Ratio | QoS | GM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| p0 | 0.00 | 0.00 | 0.00 | 3480.68 | 0.75 | 32.33 | 1483.65 | 0.67 | 344.62 | 1037.90 | 0.68 | 292.74 | 760.02 | 0.72 | 241.04 | 0.00 |
| p1 | 0.00 | 0.00 | 0.00 | 3482.03 | 0.75 | 32.46 | 1910.75 | 0.87 | 259.17 | 1344.83 | 0.89 | 220.13 | 958.77 | 0.91 | 171.77 | 0.00 |
| p2 | 0.00 | 0.00 | 0.00 | 3467.45 | 0.75 | 32.53 | 2410.65 | 1.10 | 176.61 | 1643.03 | 1.08 | 148.83 | 1147.83 | 1.08 | 115.46 | 0.00 |
I look at the wrf file for mailserver and noticed that there are no result after around 30 minutes
| \\VMMARKPCLIENT\Exchange Load Generator Engine(_total)\Tasks Dispatched | \\VMMARKPCLIENT\Exchange Load Generator Engine(_total)\Tasks Dispatched/sec. |
| 8097 | |
| 9950 | 30.87469 |
| 11804 | 30.88691 |
| 13659 | 30.90202 |
| 15512 | 30.87025 |
| 17365 | 30.87024 |
| 19220 | 30.90563 |
| 21075 | 30.89996 |
| 22928 | 30.86613 |
| 24782 | 30.88691 |
| 26637 | 30.90614 |
| 28492 | 30.90562 |
| 30346 | 30.89102 |
| 32201 | 30.90202 |
| 34054 | 30.87229 |
| 35909 | 30.89946 |
| 37762 | 30.87282 |
| 39615 | 30.87024 |
| 41468 | 30.87024 |
| 43323 | 30.89996 |
| 45176 | 30.8723 |
| 47031 | 30.90562 |
| 48884 | 30.87282 |
| 50738 | 30.88485 |
| 52592 | 30.88896 |
| 54445 | 30.86819 |
| 56300 | 30.90202 |
| 0 | |
| 0 | 0 |
| 0 | 0 |
When i look at the vmmark2-mailserver-0.xml file, i found that runlengthduration is 30 minutes, is this the main problem?
<RunLengthDuration>P0Y0M0DT0H30M0S</RunLengthDuration>
<SimulatedDayLengthDuration>P0Y0M0DT2H30M0S</SimulatedDayLengthDuration>
Cwtan