Hello,
I am using EsXi 5.1 and followed the instructions in http://blog.davidwarburton.net/2010/10/25/rdm-mapping-of-local-sata-storage-for-esxi/ to mount my hard drives to the VM(Solaris 11)
when I ssh into the ESxI host and runa dmesg, I see quite a few of the below error messages.
Any ideas ?
Thanks
2013-01-06T06:11:58.483Z cpu1:4941)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x1a (0x41240080ddc0, 4941) to dev "t10.ATA_____ST2000DM0012D9YN164__________________________________W1E1HAM0" on path "vmhba35:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense da$
2013-01-06T06:11:58.483Z cpu1:4941)ScsiDeviceIO: 2316: Cmd(0x41240080ddc0) 0x1a, CmdSN 0x80000280 from world 4941 to dev "t10.ATA_____ST2000DM0012D9YN164__________________________________W1E1HAM0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
2013-01-06T06:11:58.699Z cpu1:4941)ScsiDeviceIO: 2316: Cmd(0x41240080e9c0) 0x1a, CmdSN 0x80000268 from world 4941 to dev "t10.ATA_____ST2000DM0012D9YN164__________________________________W1E1HAM0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
2013-01-06T06:11:58.701Z cpu1:4941)ScsiDeviceIO: 2316: Cmd(0x4124008166c0) 0x1a, CmdSN 0x800002c0 from world 4941 to dev "t10.ATA_____ST2000DM0012D9YN164__________________________________W1E1HAM0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.
2013-01-06T06:11:58.703Z cpu1:4941)ScsiDeviceIO: 2316: Cmd(0x4124008166c0) 0x1a, CmdSN 0x80000328 from world 4941 to dev "t10.ATA_____ST2000DM0012D9YN164__________________________________W1E1HAM0" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0.