Re: Plugin registration fails, no idea why
Hi Flippinger, Its good to know that its working in your environment. You can run the initial network setup by accessing your virtual appliance console as root and running "configure-network" command....
View ArticleRe: Mixed Cluster 4.1/5.1 & Cisco Nexus 5020 in the mix; strange vmotion...
Interesting, if possible try with v6 of NX-OS? v4 is too old may be. Regards. Sent from my iPhone.
View ArticleRe: Effect of changing vCenter servers system locale
Hi, Thanks for the reply. I believe you are correct as I setup a 4.1 lab on my home pc & simulated changing the system locale. Everything seemed to be ok afterwards. I took a peek inside the...
View ArticleRe: Physical Memory Resources In Regard to VRAM
With the release of vSphere 5.1, vRAM is no longer a concern. The only limit you will run into now is the 32GB cap on physical memory when using the free VMware vSphere Hypervisor.
View ArticleRe: Scheduled Backups stopped running
Arinath - The scheduler service not starting automatically on some restarts of the appliance is a known issue and will be resolved in the next release.Thanks,
View ArticleRe: Need some advice on hard disk hot-add
As long as you add the second disk to an existing disk controller, you should have no problems at all. Add it, then rescan in Windows and partition it.
View ArticleActive Directory plugin multi domain support
I am struggling with getting vCO to work with multiple domains. From the very light documentation it sounds like it should work but no matter what combination of things I try I cannot seem to get...
View ArticleRe: ESXi 4.1 iSCSI settings different when upgrade to 5.1
zXi wrote:Well, it is the new feature of vSphere 5.1 to have PORT BINDING. CHECK OUT here and hereYep I realized it was a new feature, I was just expecting to see that option when doing an upgrade from...
View ArticleRe: ESXi 5.1 - netwrk shows as up but no traffic seen
I upgraded from 5.0 where it worked fine on 5.1r8168shows no errors, but the pings are going nowhere~ # Esxcfg-nics-lName PCI Driver Link Speed Duplex MAC Address MTU Descriptionvmnic0 0000:02:00.00...
View ArticleRe: vCenter 5.1 w/ Active Directory 'Domain Local' groups
Welcome to the forums. I gather you a re using SSO (if you are using 5.1) - in your Active directory configuration - are you connecting to port 389 (Active directory) or are you using the global...
View ArticleRe: VXLAN cluster preparation issue
This is a vShield/vCloud Network and Security issue, not specifically a vCloud Director issue. I've seen it before too ... just can't remember where.
View ArticleRe: Consoles never load
Sorry to hear you've had some issues. We were experiencing some capacity issues earlier today which appear to be cleared up now. At least I just launched HOL-INF-02 without issue. Thanks for letting...
View ArticleRe: import vm xenserver to esxi 5.0
Welcome to the forums. You would most probably be using VMware converter. I wrote a blog post a way back on how this can be done. This is not a specific howto for your case - but you should be able to...
View ArticleRe: Physical Memory Resources In Regard to VRAM
Unfortunately, 5.1 isn't an option here in this environment. We're currently running 4.1.
View ArticleClik here to view.
Re: Как две сетевые карты поместить в одну подсеть?
DimaX27 wrote: Т.е. то что называется Physical Adapters не является сетевыми картами? Я правильно понял, что это "апплинки-трубы"?Правильно. Вам нужен обычный физический свич, куда Вы вставите оба...
View ArticleRe: Multipathpolicy change
Coming back to say thanks for the help again. Still working on implementing the script into my production environment, but I was able to work both parts of the script together and is working in my lab...
View ArticleRe: Physical Memory Resources In Regard to VRAM
With versions ESXi 4.1 there's neither a vRAM nor a physical memory limit of 32GB. However, with you are limited to processors with a maximum of 6 cores. André
View ArticleRe: Duda con instalacion de vcenter Adicional
OK, graicas por tu ayuda Diego. 2013/1/27 Diego Quintana <communities-emailer@vmware.com<mailto:communities-emailer@vmware.com>> VMware...
View ArticleRe: Need some advice on hard disk hot-add
This will be the third drive if that matters. I plan only to add the hard drive, but I'm not sure about your "existing disk controller" point. Is that something VMware is going to do as part of the...
View ArticleRe: Need some advice on hard disk hot-add
You will want to add it to 0:3 or 0:x where x is a higher number. You won't be able to add it to 1:0 or any controller besides 0.
View Article