Thanks a lot for the Responce ...
I have Configured the iSCSI Port Bind. and I Achieved the Multipathing ...
Thing is i have below three vmkernel ports,
vmkernel0 = Management & vMotion Nw
vmkernel1 = iscsi1
vmkernel2 = iscsi2 (Redundancy)
I Found Connected Targets 3, Devices 12, Paths 36
It Means All 3 vmkernels accessing SAN. And My Management Nws Traffic becomes Heavy.
Is there any way to restrict vmkernel0 to access the SAN.
Thanks in Advance ......