Re: Cd/Dvd drive F:\ is not accessible incorrect function
The VM has to be shut down to change this setting. André
View ArticleRe: ESX Host utilization report....
Dear team, request u to help me on the same. regardsMr VMware
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
ok, can u please tell me the steps.. what has to be done after vmware is shutdown...you tell me the steps wil try from my side,,
View ArticleRe: NIC not found after removing for rhel 6 vm
Morning, This is a common issue. eth0 is hard coded in /etc/sysconfig/network-scripts to a specific MAC address. Make sure your using ifconfig -a not just ifconfig... in this situation ifconfig...
View ArticleRe: ESXi 5.1 Host system stopped responding
Is your default route for management still there?You can check by typing: esxcli network ip route ipv4 list we've had a few v5.x hosts randomly losing their default gateway recently for some unknown...
View ArticleRe: VMDK mapped / not mapped to a VM
Friend, I have run the rvtools and i have found 15+ .vmdk files as "Possibly a Zombie vmdk file! Please check" in tabvHealth..... Does it means these .vmdk files arenot in used or orphaned, hence...
View ArticleRe: management network, set on host or vcenter?
This is a really odd one... you may want to consider removing the hosts from vcenter and re-adding them. You can do the following process:1. Disconnect2. Remove host3. Re-add host4. See if problem...
View ArticleRe: Validate network design 2x 10GbE - NAS only 4x 1GB (jumbo frame)
I agree, will not be using Jumbo Frames. Using Jumbo Frames would add an extra complexity where things could go wrong.
View ArticleRe: NIC not found after removing for rhel 6 vm
+1 nielse and +1 gortee edit /etc/udev/rules.d/70-persistent-net.rulescomment out all previous versions of eth0 (keep the one with the new MAC - you can check the MAC in vSphere VM settings)Then you...
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
After you shut down (not suspended) the VM edit the VM's CD-ROM settings and enable "Legacy Mode" in the Advanced settings. André
View ArticleRe: Installing Windows 8 on VMFusion 5
Thank you to everyone who responded. Your instructions were helpful. I did ultimately need to work with VM technical support to walk me through the procedure and we were able to resolve the issues I had.
View ArticleRe: Only one network listed when installing OVF
Are you using a distributed virtual switch like the standard vSphere DVS or maybe the Nexus1000V?I found that some appliance aren't necesssarily compatible with distributed switches at install time,...
View ArticleESXi 5.1 (Release Status)
Hi, Can you confirm as to whether ESXi 5.1 is still classed as GA (General Availability) ? Thanks
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
hi thanksafter shutdown i have enable Legacy now i can see auto play.. but this auto play is comming for every 10 seconds and when i click on cd drive system saying insert the disk.. but cd is already...
View ArticleRe: [Bug] Unable to remove legacy static software iSCSI target
Usually after removing a iscsi target or making config changes to the software iscsi initiator, the host should be rebooted. Have you bound your iSCSI vmk interface to the Software iSCSI initiator...
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
Sorry I can't tell you what's causing this. Maybe an incompatibility or driver issue!? Do you have a chance to create an ISO image from the CD/DVD? This usually works way better and faster than the...
View ArticleRe: VCOPS CustomReports MetricKeys
You can perform quick searches via the "Health-Workload" widget by selecting the "Workload" radio button and typing within the search field. Alternatively, please see the below for querying the VCOPs...
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
sorry how can i get this log file?
View ArticleRe: ESXi 5.1 (Release Status)
Not sure whether I understand your question correctly. If this is about the latest available installation ISO, the yes and no. The GA ISO is still available but there's also a 5.1.0a version with...
View ArticleRe: Cd/Dvd drive F:\ is not accessible incorrect function
A VM specific log file is created in the VM's directory on your host/PC. André
View Article