Re: Connect Server (5.01) to older Agent (4.3/4.01)
Using 4.01 was successful! I had zero issues transferring these physical servers to our new vSphere 4.1 environment. Thanks,Richard
View ArticleRe: USB hypervisor backup
Бывает-то всяко. Но нужно разумно оценивать шансы выхода из строя того или иного компонента инфраструктуры и заняться тем, что приоритетнее.Лично видел инфраструктуры, в которой не было бэкапа вообще,...
View ArticleRe: Converter Standalone
Dear POCEH, Also I found this attached alert in vCenter Services Health. how I can remove it?Is this happening because of this or not?
View ArticleRe: Вопрос по network redundancy
OA один. Подключен в блейд-свитч корзины. По нему понятно. Он отвалился, т.к. аплинк это свитча не работал. А вот вмварь настроена на работу через два свитча. А выжил только один хост, на котором был...
View ArticleClik here to view.
Re: Weird ESXi 5.1 network performance with file copy
Hi kermic, Thanks for your suggestions.I've added a second NIC on the FN box and copying over iSCSI finished now within an hour.Now I'll try the same over NFS.See how that's going..
View ArticleRe: Serial and parellel port for VM
parallel ports are mainly used to connect to the devices like printers. http://en.wikipedia.org/wiki/Parallel_port Serial ports are used to connect the console terminals like Hyperterminal for...
View ArticleRe: Problem install Windows Server 2012
Yes, I think its working. Check out properly. MLM Software | Ecommerce Software Websites | Architects in Pune
View ArticleRe: Take a minute to tell us about Converter!
Antoan, If you could take some comments to your uplines and those that work on converter: 1. Bring GPT support into the latest version - to support this project I've had to have a customer purchase...
View ArticleRe: "No compatible network adapter found" HP Blade VirtualConnect Upgrade to...
You need to boot the Blade servers with the "HP Service Pack for ProLiant CD" to update the NIC firmware.Online firmware updates are also possible (through "Smart Components"), but unfortunately not...
View ArticleClik here to view.
Analysis in OPs
Hi I am working OPs 5.0.1 . In a short time worked with OPs 5.6 be familiar some analysis such as : if demand>usage I should check Contention by using heatMap and so on... futher more I get All...
View ArticleRe: Can't take a snapshot with memory flag 0
@CaDVM:Your Workarround fixed the problem with the snapshots. But the essential point for running a successful backup: You must not have _ANY_ snapshots of that machine. It will only work, if your VM...
View ArticleRe: Converter Standalone
The integrated Converter is different from standalone Converter. Probably you need to uninstall *all* converters and made a clean install, then try again (with latest Converter 5.0.1). HTH
View Articlethe windows installer service could not be accessed
Hi, I'm trying to update an App by installing an update.msi started from the thinapped cmd prompt. When I do, I get the error: "the windows installer service could not be accessed". Any ideas anyone?...
View ArticleClik here to view.
Esxi Boot error
I have installed ESXi 5.0 U1 in the IBM HX5 Blade server. The installation has gone well,but once I restarted the server i has given me the attahced error.
View ArticleRe: Converter Standalone
Worker logs can be found at %ALLUSERSPROFILE%\VMware\VMware vCenter Converter Standalone\logs. Look for vmware-converter-worker-###.logThe message in health status is about the integrated converter...
View ArticleRe: the windows installer service could not be accessed
This is a known limitation. The Windows Installer Service is running outside the virtual environment and therefore MSI updates fails. We are investigating it but right now no workaround available.
View ArticleRe: commands to do the task
You can try the following PowerCLI code to perform the requested tasks. Change MyVM into the name of the virtual machine that you want to modify. The script waits 60 seconds. Maybe you have to increase...
View Article