Re: Virtualizing Lync?
Its all depend upon the storage and the pnics you have. if you have 10gig ethernet, and vsphere ent+ license dedicate atleast 2 gig for the lync server networking by using NIOC.if you have HP blades...
View ArticleRe: Unable to remove old snapshots
if you have a downtime window..then shutdown the VM and do a cloning.. then remove the entire...old VM foler from the datastore. This is simple...
View ArticleHow to restore an inaccessible VM?
Hello folks, Wanted to see if anyone has advice here. I am using an HP p4000 VSA (lefthand) as my shared storage for my vSphere 5 cluster.When I have to reboot my VSA VM, the VMs that are stored there...
View ArticleHyper-V внутри ESXI 5.1
Есть HP Proliant Microserver с установленным VMWare Free Hypervizor'ом 5.1 Внутри есть виртуалка с Windows 2008R2 SP1. Можно ли на ней поднять роль Hyper-V? Пробовал по этой...
View ArticleRe: ESXI VLAN/Trunking
you have mentioned 3 nics in the server, 2 for the storage and 1 for the management.So there is no redundancy in the management that is in the vswitch. if i disconnect one cable from the Team the...
View ArticleRe: VCAP5-DCD version 5.0 or 5.1
I'm not aware of the exam having been updated, check the latest exam blueprint PDF for clarification.
View ArticleClik here to view.
Re: Networking layout
so far it is good. but how many pnics you have. one thing you can do for good performance is.as of now you have only using one module of the physical switch for the storage, that is the all the storage...
View ArticleRe: Technical Design Drawing
you can use xmind, evernote etc.. and also the snagit for creating ideas...diagrams etc.
View ArticleEnable 3D RHEL/CentOS 6.x guest?
How can I have 3D accelerated graphics in a RHEL/CentOS 6.x guest?Host is windows 8 pro with latest nvidia driver 313.96 and VM guest setting 3D support is checked. However I see only this in glxinfo:...
View ArticlePerformance graphs with holes: Athlon II x4 620 2.61 , 8 Gb Ram - ESX +...
Hi all. Let me present you with my training and learning project that I started for about 2 years ago. Because of the very limited budget, I had to configure my server manually. I checked the hardware...
View ArticleRe: How to restore an inaccessible VM?
I have experinced a simular problem with my vm's as well. It appears that although the datasotre is back online ESXi does not mount the datasotre and doing a rescan / refresh does not help. What I have...
View ArticleRe: VMDirectPath and ATI Radeon
I tried it in the x1 slot, x8 slot, and the x16 slot and get the same thing. I have two other cards for testing, a 3450 and a 7850. Shortly after my last post, I orderd a x8 to x16 PCI slot adapter...
View ArticleRe: Postscan window is not responding.
Thanks for the reply, by increasing the drive space in VM, postscan succeeded. Earlier 10 GB free space was available but increased to 20 GB. Regards,Veeresh.
View ArticleESX 4.1 + Vcenter: Want to test View 4.5. Do I need to reinstall everything?
Hi all, I am testing ESX 4.1 + Vcenter. One of the biggest problems I have is the poor performance when using RDP. The VMs installed are 2008x64, XPx32, 7x64, and Ubuntu desktop. Vcenter is installed...
View ArticleVmWare Ace player validation error.
Hi all,I have a VMWare Ace player installed (VM@HOME), and it used to work just fine. (on Win7 64bit).Since last week I get the following error after entering my password in the login window: Error...
View ArticleClik here to view.
vCenter Server Red in View Health Monitor - SSL problem?
View 5.1.12 Connection Servers1 Security GatewayvCenter 5.0.0 After a recent reboot of my vCenter server that's tied into my View enviroment, the system health monitor is displaying it as a red icon....
View ArticleOS X - edit .vmx to auto accept / connect USB HID device?
Hi everyone, I'm on VMware Fusion 4.1.3.Using Apple's USB Prober one can get usb device info & ID numbers.Like this: Feb 9 14:31:59.007 [1] [0xffffff8029d95800] USB HID Interface #0 of device...
View ArticleRe: Slow Performance with Shared Folders with 1.1
This looks very promising! Well done, and thanks! This has bugged me for ages.
View Article